Yep, I'm doing another one, MT 18 as usual!

Work in progress? Car partially underway? If you want a spot to dedicate to the work this is where you'll want to go.
User avatar
MorbidDK
Posts: 618
Joined: Thu Aug 31, 2000 12:00 pm
Location: Bear, DE
Contact:

Postby MorbidDK » Tue Jun 05, 2007 5:40 pm

Nice job man... took about 25 min or so to get through the whole thing. Honestly, I only read through your posts and that made the time fly. I really wanna get started glassing my spare tire well and reading this and seeing all the steps in process makes it look almost doable. :) Then again I'm gonna need to get a dremel or router or something as I don't have crap to cut and shape wood or anything like that.

Can't wait to see how the amp rack comes together to compliment the nice and shiny box.
User avatar
Member02
Posts: 2891
Joined: Wed Dec 12, 2001 8:07 pm
Location: viginia beach, VA
Contact:

Postby Member02 » Tue Jun 05, 2007 6:08 pm

yea, a good router is a MUST, and a dremel NEVER hurts... I've found mine soo useful over the years.


besides, with a good router, you can do all kinds of things. the only drawback, is half the time you need to go buy the certain bit you need, and they don't come cheap.
User avatar
Member02
Posts: 2891
Joined: Wed Dec 12, 2001 8:07 pm
Location: viginia beach, VA
Contact:

Postby Member02 » Sat Jun 09, 2007 10:20 am

hm... I just opened up my 4th gallon can of Resin from USComposites.com... it's BLUE now!

yay! no more ugly brownish yellow resin! I'll have pics up later...

Amp Rack is in progress as of 30 minutes ago.
User avatar
Audio Arts
Posts: 40
Joined: Wed Aug 10, 2005 8:35 pm
Location: Illinois
Contact:

Postby Audio Arts » Sat Jun 09, 2007 11:14 am

Cool looking project. Can't wait to see how the amprack turns out.
Automotive Enthusiast Hangout

http://www.cyvforums.com
User avatar
X-OvrDistortion
New Member
Posts: 10182
Joined: Wed Jul 24, 2002 11:00 am
Location: Blacker then the blackest black times infinity
Contact:

Postby X-OvrDistortion » Sat Jun 09, 2007 11:39 am

That makes me want to work on mine, but I lack the necessary funding right now.....damn house!!
User avatar
Ezekiel81923
New Member
Posts: 4161
Joined: Sun Jan 19, 2003 12:52 pm
Location: The Illadelph
Contact:

Postby Ezekiel81923 » Sat Jun 09, 2007 12:19 pm

that's amazing...

good work dude
Pioneer -- A/D/S -- AA Poly Mids -- Helix Dark Blue --
-- Orion HCCA -- Oz Matrix Elites -- Stinger -- Knukonceptz

Next In Line: a/d/s P4100
User avatar
Member02
Posts: 2891
Joined: Wed Dec 12, 2001 8:07 pm
Location: viginia beach, VA
Contact:

qyqwrb

Postby Member02 » Sat Jun 09, 2007 2:57 pm

yay, I was on the clock while working on my project, life rules!

anyhow, this is where I'm generally going to place amp:

Image


As a fellow... conservationalists... I don't like to waste natural resources (or money) so I always recycle when I can... this is the old box's amp rack:

Image


after laying down tape, and cutting the wood to fit (almost, it needs a few round spots..)

Image


as you can see the new B-440 resin from uscomposites is blue! it's awsome!

Image


Since this is not a subwoofer box, I figure I can make it thin... First layer:

Image

and to my surprise, only ONE layer of Kyntex 17oz biaxial stitched cloth was strong enough to pull the mold out (again, this cloth is soo much better than anything else!)

Image

Image
Image
Image

I only had to add a second layer to the bottom (it's flat, therefore weak) and the top of the mold, now it's strong enough...

those little blocks of wood are to hold up the main peice of wood an extra inch high, so the amplifier will be centered in the opening of the amp rack.

Tomorrow I'll finish up the entire mold and hopefully get some filler on it.
User avatar
Member02
Posts: 2891
Joined: Wed Dec 12, 2001 8:07 pm
Location: viginia beach, VA
Contact:

Postby Member02 » Sun Jun 10, 2007 4:29 pm

update!

Image
Image
Image

Image
Image
Image
Image
Image

Image
Image

Image
Image

for some reason this "blue" version of B-440 resin takes nearly twice as long to dry!!!!! so I didn't get as far as I wanted to...
User avatar
fbi90909
Posts: 407
Joined: Mon May 23, 2005 5:37 pm
Location: Key West, FL

Postby fbi90909 » Sun Jun 10, 2007 4:53 pm

are you mounting the amp on the inside of the rack with the internals being displayed like your previous box?
if so screwing that amp in would be a pain unless if you make an opening on the back side of it. which i'm sure you already thought of :/
User avatar
Member02
Posts: 2891
Joined: Wed Dec 12, 2001 8:07 pm
Location: viginia beach, VA
Contact:

Postby Member02 » Sun Jun 10, 2007 5:40 pm

fbi90909 wrote:are you mounting the amp on the inside of the rack with the internals being displayed like your previous box?
if so screwing that amp in would be a pain unless if you make an opening on the back side of it. which i'm sure you already thought of :/



HAA....:cwm10:

well... I've got lots of cutting tools at my disposal.

Return to “Project Logs”

Who is online

Users browsing this forum: No registered users and 1 guest